Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FC007
Message Configuration job already created, cannot create another config job on specified target until
existing job is completed or is cancelled.
Detailed
Description
Configuration job already created on the specified target. No further command is allowed until
the existing job succeeded or the job is cancelled.
Recommended
Response Action
Wait for the existing job to complete or cancel the existing job and retry the operation.
Category Configuration
SubCategory FC = Fiber Channel
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FC008
Message No pending data present to create a Configuration job.
Detailed
Description
No changes are available between the previous configuration and the current configuration.
To create a Configuration job, change at least one attribute.
Recommended
Response Action
Change the configuration of one or more attributes and retry creating the Configuration job.
Category Configuration
SubCategory FC = Fiber Channel
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
363