Reference Guide

18
FC Event Messages
FC102
Message The FC arg1 Port arg2 link is down
Arguments
• arg1 = Controller
• arg2 = Port
Detailed
Description
The FC link is down. Either the FC cable is not connected or the FC device is not working.
Recommended
Response Action
Verify that the FC port is enabled and if the port has Activity/Speed LEDs, that they are lit.
Check the FC cable, FC cable connections, and the attached FC switch.
Category System Health
SubCategory FC = Fiber Channel
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
FC103
Message The FC arg1 Port arg2 network link is up.
Arguments
• arg1 = Controller
• arg2 = Port
Detailed
Description
The transition from network link down to network link up has been detected.
Recommended
Response Action
No response action is required.
Category System Health
SubCategory FC = Fiber Channel
359