Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.3

341

342

343

344

345

346

347

348

349

350

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

ENC100

Message

arg1

is sending inconsistent reponses to the controller.

Arguments

•

arg1 =

enclosure name

Detailed

Description

The storage controller is not receiving a consistent response from the enclosure due to a

firmware problem or an incorrect cabling configuration. If the cables are longer than the

specified maximum length, the signals may be degraded.

Recommended

Response Action

Turn off all the enclosures attached to the system, check if the cable configurations are

correct. and reboot the system. If the problem persists, update the enclosure firmware to the

latest supported version. Download the latest supported version of the firmware from the

service provider. For more information about cable configuration, see storage enclosure

documentation.

Category Storage

SubCategory ENC = Storage Enclosr

Severity Severity 1 (Critical)

Trap/EventID FALSE

LCD Message No LCD message display defined.

Initial Default. TRUE