Reference Guide

DIS009
Message Notification of iDRAC IP address changed to arg1 sent to Provisioning Server.
Arguments
• arg1 = new IP address
Detailed
Description
iDRAC IP address sent to Provisioning Server.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
DIS010
Message Auto Discovery LCD display message: arg1
Arguments
• arg1 = progress message
Detailed
Description
The Auto Discovery process has encountered a problem. One of the following messages will
be displayed on the LCD display and entered in the LC log: 1) No credentials returned, 2)
Blocked Because Admin Account Enabled, 3) Blocked Because IPv6 Enabled, 4) No IP on NIC,
5) No provisioning server found, 6) Provisioning server is unreachable/invalid address, 7) SSL
connection failed no service at IP/port, 8) SSL connection refused, 9) SSL connection failed
(Server authentication), 10) SSL connection failed (client authentication), 11) SSL connection
failed other, 12) SOAP failure, 13) Failed to create account, 14) Blocked Because Active
Directory Enabled, 15) No Service Tag, and 16) Unknown.
Recommended
Response Action
Refer to Lifecycle Controller Remote Services Users Guide for additional information for LCD
messages.
Category Configuration
SubCategory DIS = Auto-Discovery
Severity Severity 3 (Informational)
Trap/EventID FALSE
315