Reference Guide

Arguments
• arg1 = Tape|Disk
• arg2 = Drive Location
• arg3 = Serial Number
Detailed
Description
If <Tape> then only Dell tape drives are tested and supported. If <Disk> then disk drive may not
be a Dell drive.
Recommended
Response Action
Customer appears to have added a non-Dell Tape drive to his system.
Category Storage
SubCategory DIAG = Diagnostic
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG8158
Message arg1 Drive arg2 - S/N arg3 , incorrect status = arg4 \n arg5 .
Arguments
• arg1 = Backplane|Expander|RD1000
• arg2 = Drive Location
• arg3 = Serial Number
• arg4 = 80000000000000??
• arg5 = Error Reason
Detailed
Description
A device failed a command and testing cannot complete.
Recommended
Response Action
Retry test. If failure persists and BIOS is up to date, a hardware problem is indicated.
Category Storage
SubCategory DIAG = Diagnostic
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
307