Reference Guide

LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG0314
Message Thermal: The ( arg1 ) reading ( arg2 C) exceeds the thermal limit.
Arguments
• arg1 = Sensor Name
• arg2 = Degrees
Detailed
Description
Recommended
Response Action
Check the event log for thermal events, including defective fans and defective sensors. Inspect
the system for clogged or obstructed air vents. Make sure that the BIOS is current and rerun
the diagnostics.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG0315
Message Sensor: The ( arg1 ) reading arg2 C) is lower than expected.
Arguments
• arg1 = Sensor Name
• arg2 = Degrees
Detailed
Description
Recommended
Response Action
Check the event log for thermal events, including defective fans and defective sensors. Inspect
the system for clogged or obstructed air vents. Make sure that the BIOS is current and rerun
the diagnostics.
296