Reference Guide

• arg3 = 80000000000000??
• arg4 = Error Reason
Detailed
Description
Recommended
Response Action
SMART Predictive Failure indicates the hard drive has failed SMART and maybe nearing the
end of its life. Other types of <Error Reason> in this category may indicate an intermittent or
firmware problem, rerun the test again. Desktops, servers: Check the hard disk drive cables
and connections. All systems: If error persists, make sure that hard disk drive firmware and
BIOS are current. The <80000000000000??> value is an EFI error code returned by the driver.
Category Storage
SubCategory DIAG = Diagnostic
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG0152
Message Optical Drive arg1 - Incorrect status = arg2arg3 .
Arguments
• arg1 = Nth Drive
• arg2 = Hex
• arg3 = Error Reason
Detailed
Description
Recommended
Response Action
Check the drive cables and connections. If error persists, make sure that drive firmware and
BIOS are current. The <80000000000000??> value is an EFI error code returned by the driver.
Category Storage
SubCategory DIAG = Diagnostic
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
294