Reference Guide

DIAG0125
Message The event log indicates degraded or disabled ECC functionality. Memory testing cannot
continue until the problems are corrected, the log cleared and the system rebooted.
Detailed
Description
IPMI System Event Log is full for various reasons or logging has stopped because too many
ECC errors have occurred.
Recommended
Response Action
Clear the log and reboot and retest.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG0126
Message The event log(s) must be cleared before testing can continue.
Detailed
Description
Recommended
Response Action
Clear the log, reboot, and retest.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
290