Reference Guide

Recommended
Response Action
MemRX not enabled or not supported. Servers UEFI: Power down system and re-seat DIMMS.
Retry test and if no error occurs it was a DIMM connection issue. Client LEGACY: Power down
system and re-seat DIMMS. Retry test and if no error occurs it was a DIMM connection issue.
Check for latest BIOS.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG0124
Message arg1 , arg2
Arguments
• arg1 = Timestamp
• arg2 = Log message
Detailed
Description
Log message is different for the log type supported by the system. An IPMI log may refer to
"SEL", other log types also exist.
Recommended
Response Action
Depends on <Log message>.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
289