Reference Guide

LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CTL58
Message arg1 SAS SMP communications error arg2
Arguments
• arg1 = Controller name
• arg2 = args
Detailed
Description
The text for this alert is generated by the firmware and can vary depending on the situation.
The reference to SMP in this text refers to SAS Management Protocol.
Recommended
Response Action
There may be a SAS topology error. See the hardware documentation for information on
correct SAS topology configurations. There may be problems with the cables such as a loose
connection or an invalid cabling configuration. See the Cables Attached Correctly section for
more information on checking the cables. See the hardware documentation for information on
correct cabling configurations. Verify that the firmware version is supported.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
Trap/EventID 4329
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
CTL59
Message arg1 SAS expander error: arg2
Arguments
• arg1 = Controller name
• arg2 = args
Detailed
Description
There may be a problem with the enclosure. Verify the health of the enclosure and its
components. To verify the health of the enclosure, select the enclosure object in the tree view.
The Health subtab displays a red X or yellow exclamation point for enclosure components that
are failed or degraded. See the enclosure documentation for more information.
256