Reference Guide

Recommended
Response Action
No response action is required as the controller is taking the required corrective action.
However, If this message is generated often (such as during each reboot), then replace the
controller.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CTL5
Message Bad block replacement error on arg1 .
Arguments
• arg1 = Controller name
Detailed
Description
A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement,"
"Sense," or "Medium" Error for more information.
Recommended
Response Action
See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more
information.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
CTL50
Message The arg1 NVRAM has corrupt data.
Arguments
• arg1 = Controller name
251