Reference Guide

Trap/EventID 2241
LCD Message CPU <number> has a thermal trip. Check CPU heat sink
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
CPU0002
Message CPU arg1 has failed the built-in self-test (BIST).
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response Action
1) Turn system off and remove input power for one minute. Re-apply input power and turn
system on. 2) Make sure the processor is seated correctly. 3) If the issue still persists, contact
technical support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory CPU = Processor
Severity Severity 1 (Critical)
Trap/EventID 2241
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
CPU0003
Message CPU arg1 is stuck in POST.
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response Action
1) Turn system off and remove input power for one minute. Re-apply input power and turn
system on. 2) Reduce system configuration to minimum memory and remove all PCI devices. If
system completes POST, update system BIOS. Re-install memory and PCI one component at a
time to meet the original configuration. 3) If the issue still persists, contact technical support.
Refer to the product documentation to choose a convenient contact method.
210