Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BAT1013
Message Recharge count has exceeded the maximum limit for battery on arg1 .
Arguments
• arg1 = Controller name
Detailed
Description
The battery cannot be recharged further.
Recommended
Response Action
Replace the battery pack.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BAT1014
Message arg1 battery charge in-progress.
Arguments
• arg1 = Controller name
Detailed
Description
Diagnostic event for service to determine if there is an ambient temperature problem.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
160