Reference Guide

Recommended
Response Action
As indicated by the job status, wait for restore to complete. After the status displays Complete
or Failed, wait for a few minutes for the Integrated Remote Access Controller (iDRAC) to
restart. After restart, power on the Host System using iDRAC.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR051
Message Performing Component Configuration Restore for Device : arg1
Arguments
• arg1 = device name
Detailed
Description
The configuration import for the specified device in progress.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR089
Message Lifecycle Controller needs to be updated.
Detailed
Description
A problem has been detected with the installation of the Unified Server Configurator (USC).
This needs to be corrected before a valid Backup file can be created.
142