Reference Guide

TMP505
Message The arg1 sensor has failed with a value of arg2 degrees Celsius.
Arguments
• arg1 = sensor name
• arg2 = temperature
Detailed
Description
The temperature sensor identified in the message has failed.
Recommended
Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a
failed sensor, replace the system board. For more information, contact your service provider.
Category System Health
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1333