Reference Guide

Recommended
Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a
failed sensor, replace the system board. For more information, contact your service provider.
Otherwise, change the warning threshold for the temperature sensor (if applicable) such that it
corresponds to the hardware configuration.
Category System Health
SubCategory TMP = Temperature
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
TMP504
Message The arg1 sensor has detected an error with a value of arg2 degrees Celsius.
Arguments
• arg1 = sensor name
• arg2 = temperature
Detailed
Description
The temperature sensor identified in the message is faulty, or the temperature exceeds the
critical threshold. This condition can cause system performance issues and degradation in the
moitoring capability of the system.
Recommended
Response Action
Review system power policy, check system logs for temperature related failures.
Category System Health
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1332