Reference Guide

LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
TMP500
Message The arg1 sensor has failed with value the arg2 degrees Celsius.
Arguments
• arg1 = sensor name
• arg2 = temperature
Detailed
Description
A temperature sensor identified in the message has failed. This condition can cause system
performance issues and degradation in the moitoring capability of the system.
Recommended
Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a
failed sensor, replace the system board. For more information, contact your service provider.
Category System Health
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
TMP501
Message Unable to read the arg1 sensor value.
Arguments
• arg1 = sensor name
Detailed
Description
A temperature sensor identified in the message has failed. This condition can cause system
performance issues and degradation in the moitoring capability of the system.
Recommended
Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a
failed sensor, replace the system board. For more information, contact your service provider.
Category System Health
SubCategory TMP = Temperature
1330