Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS073
Message Unable to apply changes that require system reboot because the Lifecycle Controller State
setting is disabled in the configuration XML.
Detailed
Description
The import of system configuration XML file operation completed with errors because the
Lifecycle Controller State was disabled in the input XML. Configuration changes requiring a
system reboot were not applied.
Recommended
Response Action
Enable the Lifecycle Controller State setting and retry the operation.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS074
Message Unable to apply configuration changes because another configuration job is in progress.
Detailed
Description
Unable to apply configuration changes because another configuration job is in progress.
Recommended
Response Action
Wait until the current configuration job is complete and retry the operation.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
1302