Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS061
Message Unable to complete component configuration.
Detailed
Description
Some configuration changes for the component identified by the Fully Qualified Device
Descriptor (FQDD) in the configuration job results were not successfully applied.
Recommended
Response Action
Export the Lifecycle Log and identify the configuration changes that did not complete or
retrieve the configuration results using the GetConfigResults() method. Retry those changes
that did not complete in a separate import operation.
Category Configuration
SubCategory SYS = System Info
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS062
Message Input file for import configuration operation is invalid. The expected XML root element was not
found.
Detailed
Description
The input file for the import configuration operation does not contain a valid XML root element.
Recommended
Response Action
Open the input file in any Web browser to check for invalid content before the expected root
element. Correct the invalid content and make sure that the XML file is compliant to the system
configuration schema before retrying the operation.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
1296