Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0230
Message vFlash not enabled.
Detailed
Description
vFlash is not enabled. This may be because the user does not have enough privileges.
Recommended
Response Action
Enable vFlash and re-try.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0231
Message Partition of type \"image\" not supported on local racadm.
Detailed
Description
The partition image type specified is not available on local racadm.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
1258