Reference Guide

SWC0132
Message Unable to send test trap. Please make sure that your trap\nhas been configured correctly and
connectivity to \nthe destination endpoint exists.
Detailed
Description
Either the destination Ip address is not reachable or the required values are not configured.
Recommended
Response Action
Check for the connectivity to the configured Ip address.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0133
Message Either connect or disconnect must be specified.
Detailed
Description
Insufficient information provided.
Recommended
Response Action
Specify either the connect or the disconnect option with the subcommand.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1231