Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0102
Message The -m option is not supported by the interface being used.
Detailed
Description
The option requested is not available on the interface being used.
Recommended
Response Action
Refer to the help to get the list of options valid for the interface.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0103
Message The -E option is not valid for the specified log.
Detailed
Description
The specified log does not take in the -e option.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
1217