Reference Guide

SWC0270
Message Unable to clear the SEL. \nPossible reason may be that Local Configuration using RACADM is
disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response Action
Check if the Local Configuration using RACADM is disabled and enable it through GUI.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0271
Message Invalid syntax. The -f option is only valid with -p and -c.
Detailed
Description
The syntax for the config command is invalid.
Recommended
Response Action
Refer to the help text for the config subcommand.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1191