Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0253
Message Unable to allocate memory needed to perform operation.
Detailed
Description
Unable to allocate memory to perform the operation, see the inserted comment.
Recommended
Response Action
Power Cycle the system and re-enter the command.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0254
Message Unable to perform requested operation. \nIf the operation attempted was to configure DRAC,
possible reason may be that \nLocal Configuration using RACADM is disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response Action
Check if the Local Configuration using RACADM is disabled and enable it through GUI.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1183