Reference Guide

SWC0037
Message Unable to export the file to the network share.
Detailed
Description
Lifecycle Controller is unable to export the file to the network share because the destination
folder is not present or inaccessible.
Recommended
Response Action
Make sure that the destination folder is present and accessible, then retry the operation. If the
problem persists, check network settings and retry the operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0038
Message Unable to export the file to the network share.
Detailed
Description
Lifecycle Controller is unable to export the file to the network share because the destination
folder is read-only or inaccessible.
Recommended
Response Action
Remove the write protection on the destination folder and verify the folder is accessible, then
rety the operation. If the problem persists, check network settings and retry.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0039
Message Unable to find the backup Server Configuration Profile image.
1168