Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0062
Message Unable to export Lifecycle Log.
Detailed
Description
The destination folder is not present, the destination is full or write-protected.
Recommended
Response Action
Verify the following and retry the operation: 1) Destination folder is present. 2) Destination has
enough free space. 3) Destination is not write-protected. If the problem persists, perform an AC
power cycle and retry.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0023
Message Successfully configured encryption.
Detailed
Description
Encryption configuration is successful.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory SWC = Software Config
1160