Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0005
Message Unable to display the current hardware inventory.
Detailed
Description
The view current hardware inventory operation encountered an unexpected error while
communicating with iDRAC.
Recommended
Response Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect the power
cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0006
Message Unable to display the As Shipped hardware inventory.
Detailed
Description
The view As Shipped hardware inventory operation encountered an unexpected error while
communicating with iDRAC.
Recommended
Response Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect the power
cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
SubCategory SWC = Software Config
1153