Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0717
Message iDRAC Local Configuration is disabled. iDRAC Settings are accessed in read-only mode.
Detailed
Description
For security reasons, the local configuration is disabled. Enable local configuration from the
iDRAC Web interface
Recommended
Response Action
Enable iDRAC local configuration from iDRAC Web interface.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0722
Message Error occurred while resetting to defaults. The reset command was not accepted.
Detailed
Description
iDRAC is processing a previous reset to default command.
Recommended
Response Action
Retry after a few minutes.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
1149