Reference Guide

Detailed
Description
The rac cannot be reset, while the firmware update is in progress.
Recommended
Response Action
Wait for the firmware update to finish.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP0116
Message The RAC configuration has initiated restoration to factory defaults. \nPlease wait up to a minute
for this process to complete before accessing \nthe RAC again.
Detailed
Description
Success message.
Recommended
Response Action
No response action is required.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP0117
Message Firmware rollback initiated successfully. \nThe iDRAC will now reset to complete the firmware
rollback operation.
Detailed
Description
Success message.
1129