Reference Guide

Detailed
Description
The Diagnostic application (Embedded Preboot System Assessment - Enterprise UEFI
Diagnostics) is not installed or is corrupt.
Recommended
Response Action
Update the Diagnostics application using the Firmware Update feature in Lifecycle Controller.
For the latest Update Packages, contact your service provider.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SUP0513
Message Unable to access the Update Package.
Detailed
Description
The specified filename path to the Update Package is incorrect.
Recommended
Response Action
Enter the correct file path where the Update Package is located and retry the operation. If the
problem persists, reboot the system and retry the operation.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SUP0514
Message Unable to perform firmware rollback.
Detailed
Description
An internal error occurred while performing firmware rollback operation.
Recommended
Response Action
Exit the Firmware Rollback wizard and retry the operation. If the problem persists, reboot the
system and retry the operation.
1110