Reference Guide

BAR044
Message Waiting for Host System Shutdown to finish.
Detailed
Description
Polling to allow the host system to shut down before proceeding.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR046
Message Host System will power up approximately 10 minutes after Integrated Remote Access
Controller Restore.
Detailed
Description
The Integrated Remote Access Controller is preparing to switch over to the recently loaded
firmware. During this time connection to this controller will be lost. Once the controller has
restarted the Host system will be powered up.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
111