Reference Guide

Recommended
Response Action
Do not try to delete the job when the update process is underway. To revert to the previous
version of the update, download and update the firmware to the version desired or run the
rollback command to go back to the previous version.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP014
Message Unknown error - Delete failed.
Detailed
Description
An unknown error was encountered while trying to delete the job.
Recommended
Response Action
Retry the action. If this fails, reboot the iDRAC.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP015
Message Input parameters values should not be NULL.
Detailed
Description
One of the parameters specified received a NULL value that prevented the action from
completing.
Recommended
Response Action
Correct the parameter value and retry the command.
Category Updates
1101