Reference Guide

Detailed
Description
High Availability RAID is not supported by this firmware release. This event may occur during
the upgrade process.
Recommended
Response Action
Remove one RAID controller.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR9
Message No RAID controllers have been detected. Access to shared storage will not be available.
Detailed
Description
No supported RAID controllers have been detected. Access to shared storage will not be
availble.
Recommended
Response Action
Ensure supported RAID controllers are installed.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR003
Message Missing parameter.
Detailed
Description
Required parameter is missing
Recommended
Response Action
Refer to the RAID profile to determine required parameters
1053