Reference Guide

SEL0007
Message All event logging is enabled.
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SEL0008
Message System event log (SEL) is full.
Detailed
Description
When the event log is full, additional events are not written to the log; or older events will be
overwritten and lost. This message may also appear if the user disabled event logging. (IPMI
sensor type code 10h - offset 04h)
Recommended
Response Action
Backup and clear log.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 1 (Critical)
Trap/EventID 2377
LCD Message SEL is full. Review & clear log
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
1021