Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1027
Message Successfully sent the alert for the specified event to the configured destination.
Detailed
Description
A test event was generated and the alert was successfully sent to the destination.
Recommended
Response Action
Verify if the alerts were received by the configured tdestination. Otherwise, reconfigure the
destination and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1006
Message Unable to process the
arg1 , and the update was not applied.
Arguments
• arg1 = file name
Detailed
Description
The update was not applied because of one of the following reasons: 1) The Update Package is
invalid. 2) Lifecycle Controller is corrupted. 3) Another update is in progress.
Recommended
Response Action
Do one of the following and retry the operation: 1) Dowload the correct Update Package from
your service provider. 2) Use the Lifecycle Controller repair package to repair Lifecycle
Controller. For more information, see Lifecycle Controller Users Guide. 3) Wait until the current
update operation is complete.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
914