Reference Guide

Detailed
Description
The "vmkey" sub-command is deprecated, and the functionality is available using "vflashsd"
sub-command.
Recommended
Response Action
Use "vflashsd" sub-command instead of "vmkey". For more information about the sub-command,
use "racadm help vflashsd" command.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC987
Message Firmware update job for
arg1 is initiated.
Arguments
• arg1 = file name
Detailed
Description
After initiating the firmware update job, the time taken to complete it depends on size of the
update file.
Recommended
Response Action
This firmware update job may take several minutes to complete depending on the component
or firmware being updated. To view the progress of the job, use the "racadm jobqueue view"
command.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC988
Message Unable to initiate the
arg1 firmware update.
Arguments
•
arg1 =
file name
903