Reference Guide

Detailed
Description
Only possible configurations for the DRAC NIC are 10Mbps and 100 Mbps. For documentation
with respect to this setting, refer to the racadm User Guide under cfgNetTuning group.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC916
Message Value given exceeds the maximum threshold value.
Detailed
Description
The value given is greater than the maximum threshold value.
Recommended
Response Action
Set values lesser than the maximum threshold value. To view the maximum threshold value,
run racadm get System.Power. Cap.MaxThreshold at the command prompt.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC917
Message The syntax of the specified command is not correct.
Detailed
Description
The syntax of the specified command is incorrect.
Recommended
Response Action
See the command help text. To see the help text, run "racadm help <subcommand>".
873