Reference Guide

RAC913
Message Unable to login to RAC using the specified address
Detailed
Description
The management system could not login to the iDRAC.
Recommended
Response Action
Verify whether the username and password given for the iDRAC are correct.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC914
Message Value specified is invalid: Must be 0 (Off) or 1 (On).
Detailed
Description
The specified value is not within the valid range. To set the LED state to off, enter 0. To set the
LED state to on, enter 1.
Recommended
Response Action
Set the numeric value to 0 (Off) or 1 (On).
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC915
Message 1000Mbps speed setting is Read Only and cannot be configured for the iDRAC NIC.
872