Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
AMP0323
Message Chassis power level current is within range.
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory AMP = Amperage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
AMP400
Message The
arg1 sensor has failed, and the last recorded value by the sensor was arg2 A.
Arguments
•
arg1 =
sensor name
•
arg2 =
current
Detailed
Description
The current sensor identified in the message has failed. This condition can cause system
performance issues and degradation in the moitoring capability of the system.
Recommended
Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a
failed sensor, replace the system board. For more information, contact your service provider.
Category System Health
SubCategory AMP = Amperage
Severity Severity 1 (Critical)
Trap/EventID FALSE
86