Reference Guide

Recommended
Response Action
Upload a valid root Certificate Authority (CA) certificate.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0294
Message The Character Accumulate Interval value is invalid. Expected range: 1-255.
Detailed
Description
The amount of time iDRAC waits before sending a partial Serial Over LAN (SOL) data packet.
This parameter is specified in milliseconds. It is recommended to use 10 milliseconds for
optimal performance.
Recommended
Response Action
Enter a valid Character Accumulate Interval value. Expected range: 1-255.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0295
Message The Character Send Threshold value is invalid. Expected range: 1-255.
Detailed
Description
This is the number of characters per Serial Over LAN (SOL) data packet. When the number of
characters accepted by iDRAC is equal to or greater than the Character Send Threshold value,
iDRAC starts transmitting SOL data packets that contain the numbers of characters equal to or
less than the Character Send Threshold value. If a packet contains fewer characters than this
value, it is defined to be a partial SOL data packet. It is recommended to use 255 characters for
optimal performance.
858