Reference Guide

RAC0275
Message Click OK to disable the NIC. Click Cancel to keep the setting unchanged.
Detailed
Description
If the the Enable NIC checkbox is cleared, remote access to iDRAC is disabled.
Recommended
Response Action
Disable NIC only if remote access is undesired.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0276
Message To save the changes and update this page, click Apply.
Detailed
Description
If the the Enable NIC checkbox is cleared, remote access to iDRAC is disabled.
Recommended
Response Action
Click Apply to save changes.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0277
Message Disabling IPv4 prevents access to iDRAC using an IPv4 address.
850