Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0153
Message Non-redundant power mode: Check the system hardware manual for implications.
Detailed
Description
Power redundancy is typically used to protect equipment from unexpected power disruption
that could cause data loss or hardware damage.
Recommended
Response Action
It is recommended to use power redundancy
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0154
Message Non-redundant power mode: Secondary power supply has degraded.
Detailed
Description
Displayed when a group of redundant power supplies has one or more individual power
supplies with bad status.
Recommended
Response Action
Replace the degraded power supply unit. Check the Power Supplies page for more information.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
817