Reference Guide

Detailed
Description
Firmware update verification process failed; the firmware update status is unknown.
Recommended
Response Action
Verify if the firmware has been updated by checking the new firmware version number. If it has
not been updated try the firmware update again in a few minutes. If the problem persists, try
uploading the firmware through another interface such as Web GUI, RACADM, or DUPs.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0142
Message File is not valid for iDRAC firmware update.
Detailed
Description
The firmware update process identified an invalid firmware image.
Recommended
Response Action
Upload a valid iDRAC firmware image.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0146
Message Firmware rollback has failed.
Detailed
Description
Firmware rollback operation failed.
813