Reference Guide

RAC0138
Message A valid certificate is not loaded.
Detailed
Description
The retrieved certificate came back as a null or empty document.
Recommended
Response Action
Upload a valid certificate.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0140
Message Firmware update has failed.
Detailed
Description
The firmware update process returned an Update Failed status.
Recommended
Response Action
Try the firmware update again in a few minutes. If the problem persists, try uploading the
firmware through another interface such as Web GUI, RACADM, or DUPs.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0141
Message Firmware update verification failed: The update status is unknown.
812