Reference Guide

Detailed
Description
Communication with the Smart Card reader is established and a Smart Card is inserted, but
there are problems accessing the Smart Card. The appropriate Cryptographic Service Provider
(CSP) drivers are not installed.
Recommended
Response Action
There may be an issue with the Smart Card Cryptographic Service Provider (CSP) drivers. Use
the client OS to install CSP driver. If the OS has problem with Smart Card, then there will have
problem using the Smart Card. So make sure Smart Card can login with Windows OS.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0108
Message An internal error is encountered. Insert a valid Smart Card and try again. (Does this and
preceeding messages show up in the SEL?)
Detailed
Description
A non-specific error is detected when accessing the Smart Card.
Recommended
Response Action
Review the error message preceeding or following this message.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0113
Message Remote Syslog Port value is invalid: Valid range is 1-65535 or 0x1-0xFFFF.
Detailed
Description
Data entered is not an integer value in the valid range of numbers.
802