Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.2

801

802

803

804

805

806

807

808

809

810

Detailed

Description

Communication with the Smart Card reader cannot be established, or is lost.

Recommended

Response Action

This error may occur because: 1. Check connection between reader and system. 2. There may

be an issue with the Smart Card reader. Try reinstalling the reader driver or use a different

reader.

Category Audit

SubCategory RAC = RAC Event

Severity Severity 3 (Informational)

Trap/EventID FALSE

LCD Message No LCD message display defined.

Initial Default. FALSE

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

RAC0106

Message The Smart Card cannot be detected. Insert the Smart Card correctly.

Detailed

Description

Communication with the Smart Card reader is established and a Smart Card is inserted, but

there are problems reading the Smart Card.

Recommended

Response Action

This error may occur because: 1. Make sure the Smart Card is seated correctly. 2. Smart Card

is invalid. Insert a valid Smart Card and try again. 3. Check connection between reader and

system. 4. There may be an issue with the Smart Card reader. Try reinstalling the reader driver

or use a different reader.