Reference Guide

RAC0606
Message The network connection test operation was successful.
Detailed
Description
The selected network connection test operation was successsful.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0607
Message Unable to perform OS to iDRAC Pass-Through with the current system configuration.
Detailed
Description
The integrated NICs in the system do not support OS to iDRAC Pass-Through.
Recommended
Response Action
Make sure the integrated NICs are enabled from BIOS setup and support OS to iDRAC Pass-
Through, then retry the operation. To access BIOS setup, press F2 during system startup. For
more information about OS to iDRAC Pass-Through, see iDRAC7 Users Guide.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
790