Reference Guide

RAC0504
Message There are no enclosures to be displayed.
Detailed
Description
Enclosures cannot be displayed. This error may occur if the host system is powered off, there
is no enclosure connected to the controller, or there is a bad or disconnected adapter cable for
the enclosure.
Recommended
Response Action
1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that the
adapter cables are properly connected and there are no bent pins.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0505
Message There are no devices to be displayed.
Detailed
Description
Devices are not displayed. This error may occur because these components are removed or
disconnected.
Recommended
Response Action
1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that the
adapter cables are properly connected and there are no bent pins.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0506
Message You do not have privileges to perform this operation.
783