Reference Guide

Detailed
Description
The Power Supply had a CRC error detected
Recommended
Response Action
Aquire the power supply firmware image and update the power supply indicated in the
message.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0802
Message The power supply redundancy policy on the system has been set.
Detailed
Description
The power supply redundancy policy on the system has been set.\n
Recommended
Response Action
No response action is required.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU0803
Message Insufficient power in chassis to power on server.
Detailed
Description
Insufficient power in chassis to power on server.
Recommended
Response Action
Utilize the Chassis Management Controller web interface to check available power and server
power requirements. If sufficient power is available, retry the operation.
751