Reference Guide

Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR30
Message Job processing initialization failure.
Detailed
Description
Operation vailidation was unsuccessful. The command, target and operation data are all
validated before proceeding. If any of them are missing or incorrect the request is failed.
Recommended
Response Action
Enable the Collect System Inventory on Restart attribute of the Lifecycle Controller and restart
the system. After the system has restarted, retry the operation.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR31
Message Job completed with errors.
Detailed
Description
All the tasks in the Job were attempted, but some did not complete successfully.
Recommended
Response Action
Check the Lifecycle Log for more details associated with this warning then retry the operation
if appropriate.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
703